Our product range covers most applications in the oil & gas, petrochemical and power industries. We supply both standardized and fully customized, engineered-to-order solutions. Thanks to their flexible designs, we can configure our heat exchangers to match your specific operating conditions, ensuring reliable operation, low operating costs and high performance.
Datang supplies a broad range of heating, cooling solutions for the metalworking industry.
Applications:
Upstream - Field compression,SAGD/EOR,Upgraders
Midstream - Compressor stations,Gas processing,Gas fractionation,LNG
Downstream - Refineries,Petrochemical plants,Power plants,CNG
Features:
Horizontal section(s) and fan(s) with vertical air ejection
Available in single fan to four fan configurations
Available with low-weight aluminum fan guard(s) for increased maintenance safety
VFD capable electrical drive for precise air control and power consumption
1. Air heat exchanger/Radiator
A kind of heat exchanger that is used to cool or heat forcibly flowing air with water, glycol solution, steam or heat conduction oil as the medium.Different models of heat exchanger should be selected according to the actual working conditions.
Air heat exchanger can be divided into air heater and air cooler.
Air heater has several forms including electric heating, steam heating, and oil heating etc.
2. Air cooled heat exchanger
Product Description
An air cooler is an equipment that uses ambient air as the cooling medium, sweeping the outside of a finned tube to cool or condense the high-temperature process fluid inside the tube.
It is an independent set of equipment with a small footprint, which can be placed indoors or outdoors according to user requirements. It can be connected to the equipment using hoses or steel pipes. The water pressure can be adjusted by adjusting the valve, which is displayed on the pressure gauge on the water distribution package. Before use, all cut-off valves of the high-frequency equipment should be closed. After self circulation, the water should be drained by the drain valve under the water distribution package to ensure that there are no debris during equipment use, so as not to cause blockage.
Product advantages
1, Improving the service life of electronic tubes (high-frequency equipment): Ordinary water is prone to scaling and requires regular cleaning The daily scaling has already affected the emission power and lifespan of electronic tubes, and in severe cases, the anode of the electronic tube is easily burned through.
2, Save electricity. Taking the 100KW high-frequency electronic tube equipment as an example, the power consumption of the anode water circuit to the ground under the action of DC high voltage is about 8KW for ordinary water and about 70W for distilled water.
3, Reduce electrolytic corrosion. Anode high voltage forms a direct current to the ground through water resistance. Causing electrolytic corrosion at the inlet and outlet of the electronic tube water jacket, the electrolytic corrosion rate of ordinary water is more than 100 times that of distilled water.
Product specifications and models
Customized products
Product Usage
Mainly used for cooling, processing, and freezing storage of meat, poultry, aquatic products, fruits and vegetables, eggs and milk, and cold beverage products in the food industry, as well as cooling and refrigeration of various alcoholic beverages and beverages such as beer. In addition, it can also meet the cooling needs of industrial cooling processing raw materials and venues in industries such as chemical, pharmaceutical, mechanical, electronic, and hydroelectric industries
3. Economizer/Finned tube heat exchanger
Product Description:
A economizer is a device installed at the lower part of the tail flue of a boiler to recover the waste heat from the exhaust gas. It heats the boiler feedwater into a saturated water heating surface under the pressure of the steam drum. Due to its absorption of heat from high-temperature flue gas, it reduces the exhaust temperature of the flue gas, saves energy, and improves efficiency, so it is called an economizer.
The steel tube economizer is not limited by pressure and can be used as a boiling type. It is generally made of carbon steel pipes with an outer diameter of 32-51 millimeters. Sometimes fins and fins are added to the tube to improve heat transfer efficiency. The steel tube economizer consists of horizontally arranged parallel elbow pipes (commonly known as serpentine pipes).
Product advantages:
1. Absorb the heat of low-temperature flue gas, lower the exhaust temperature, reduce exhaust losses, and save fuel.
2. Due to the fact that the feedwater is heated in the economizer before entering the steam drum, the heat absorption of the feedwater on the heating surface is reduced, and an economizer can be used to replace some of the more expensive evaporative heating surfaces.
3. As the feed water temperature increases, entering the steam drum will reduce the wall temperature difference, correspondingly reduce thermal stress, and prolong the service life of the steam drum.
Product Usage:
During the start-up process of the boiler (drum boiler), due to the lack of circulation in its steam water pipeline, i.e. the boiler feedwater is in a stagnant state, the water in the economizer is in a non flowing state. With the strengthening of boiler combustion and the increase of flue gas temperature, the water in the economizer is prone to vaporization, causing the local part of the economizer to be in an over temperature state. To avoid this situation, connect another pipeline from the centralized drainage pipe of the steam drum to the inlet of the economizer as a recirculation pipeline, so that the water inside the economizer is in a flowing state and avoids vaporization
Production process: finned tube type
The economizer is arranged at the tail of the boiler with lower flue gas temperature, and its main function is to:
(1) The economizer absorbs the heat from the low-temperature flue gas in the tail flue, which can reduce the exhaust temperature of low parameter boilers, improve boiler thermal efficiency, and save fuel.
(2) The adoption of economizers increases the water temperature entering the drum, reduces the temperature difference between the drum wall and the feed water, thereby reducing the thermal stress of the drum and improving its lifespan.
Finned Tube Technical Parameters
| PRODUCT |
TYPE |
TUBE MATERIAL |
FIN MATERIAL |
BASE TUBE O.D.(mm) |
FIN SPECIFICATION(mm) |
| Heat Exchanger Finned Tube |
Extruded Fin Tube |
All Kind of Material can be applied |
Aluminum A1100 |
15.88~50.8 |
7~11.5FPI |
| Fin Height Max 16mmH |
L/KL/LL-Foot Fin Tube
(Wrap On Type) |
All Kind of Material can be applied |
Copper C1100, C1220
Aluminum A1100, A1050, A1060 |
12.70~50.8 |
7~11.5FPI |
| Fin Height Max 16mmH |
| G-Fin Tube (Embedded Type) |
|
| High Frequency Welded Finned Tube |
A179 Carbon Steel Tube |
Carbon Steel Tube |
12.70~219 |
1.5~7FPI |
| Stainless Steel Tube |
Stainless Steel Tube |
Thickness0.8~3.2mm |
| Alloy Steel Material |
Alloy Steel Material |
|
| H/HH Type Finned Tube |
Carbon Steel, stainless steel,Alloy Steel |
Carbon Steel, stainless steel,Alloy Stee |
25~63 |
fin pitch 8~30
fin height <200
fin thick 1.5~3.5 |
| Studed Fin Tube |
Carbon Steel, stainless steel,Alloy Stee |
Carbon Steel, stainless steel,Alloy Stee |
25~219 |
fin pitch 8~30
fin height 5~35
Customized studs per inch |
| Integral Copper & Copper Alloy High Finned Tube |
C12200, C11000, C70600 |
C12200, C11000, C70600 |
15.88~22.23 |
5~9FPI |
| Max 12mm. H |
| Oval Finned Tube |
Carbon Steel Tube |
Carbon Steel Tube |
All Size Available |
5~15FPI |
| Stainless Steel Tube |
Stainless Steel Tube |
| Alloy Steel Material |
Alloy Steel Material |
| Copper & Copper Alloy Tube |
Copper & Copper Alloy Tube |
| Monometallic Fin Tube |
Low Fin Tube |
Carbon Steel, stainless steel, titanium, copper, brass, nickel alloy, etc. |
-- |
9.52~40 |
12,16,19,28 FPI, etc. |
| Turbo-C Tube |
| Turbo-E Tube |
| Corrugated Tube |
All Kind of Material |
-- |
6.35~40 |
2~9FPI |
| |
Business Type: |
Manufacturer/Factory |
| |
Main Products: |
finned tubes,fin heat exchanger,air cooler,radiator,economizer,condenser, vaporizer/evaporator ... |
DATANG STEEL PIPE Co., Ltd is a reputed processor and wholesaler that export to global markets for 17 years.
You will find a extensive range of finned tubes,fin tube heat exchanger,air cooler,radiator,economizer,condenser, vaporizer/evaporator in Datang.
Welcome to visit our factory and looking forward to cooperate with you.
We have a professional sales and technical team.
We design solutions and provide product cunstomization for you.
Now we have production facilities for manufacturing various types of finned tubes as mentioned below,
EXTRUDED FIN TUBE (Bimetallice Fin Tube&Integral Low Fin Tube)
'G' TYPE FIN TUBE (EMBEDDED FIN TUBE)
'L' 'LL' 'KL' TYPE FIN TUBE (WRAP AROUND FIN TUBE)
LASER WELDED FINNED TUBE
HIGH FREQUNECY WELDED FIN TUBE(Including Serrated Finned Tube)
These fin tubes typically find application in all industries where drying,heating,heat recovery in power plant\ refinery etc. The are equipped in heat exchangers like Air Cooled Heat Exchangers/Heat Recovery Systems/Boilers/Driers.
Customer Tour&Cooperation
Our advantages
PERFECT QUALITY CONTROL
We own professional quality management and process inspecion team.
FAST HIGH QUALITY SERVICE
In the process of service, the demands of all customers can be solved quickly and effectively.
SUPPLY SUPPORT CAPACITY
We ensures the product with good quality,suffcient quantity and diversification
EXCELLENT COST PERFORMANCE
Provide the most excellent products,the most favorable price and the most perfect sevice to all customers.
FAQ
Q1:Why choose us
We wish to be your First-choice one-stop heat exchanger &refrigeration Parts supplier.We are a manufactures for 17 years!All of our products can accept customization,Our mission is to provide integrated heat exchanger &refrigeration Parts for professional, efficient service.
Q2:How is quality ensured?
All our processes strictly adhere to ISO-9001 procedures.Before leaving the factory after strict pressure and tightness testing.If the product does not work properly as described, and proven to be at our fault, we will provide exchange services only for the same specific item.
Q3:If we don't find what we need on your website, what should we do? Do you make customer's heat exchanger &refrigeration parts?
You can send the pictures and drawings of the products you need by email, we will check if we have them.otherwise, We can customize new products according to customer's needs.
Q4: What is the main market for your products?
Our main market is in Middle East, South America, Europe and USA.
Q5:What about delivery time?
If we have stock of the item you need,we can send goods to you within 3 working days after deposit or 100% payment into our bank account.
If we don't have stock,different products' production time is different.Generally, it needs 7 to 20 working days.
Any other confused question, email us please, we will do our best to assist you!
Please contact me for more info today!
){kind=link}