ASTM A335 ASME SA335 P11 SEAMLESS FERRITIC ALLOY-STEEL PIPE
ASTM A335 Grade P11 Pipe are either hot finished or cold drawn with the finishing treatment. P11 Seamless Ferritic Alloy-Steel Pipe are reheated and furnished in the full-annealed, isothermal annealed, or normal-ized and tempered condition.
Standard:ASTM A 335/A 335M
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
ASTM A335 P11 Seamless Ferritic Alloy-Steel Pipes cover nominal (average) wall seamless alloy-steel pipe intended for high-temperature service.
Pipe ordered to ASTM A 335 specification shall be suitable for bending,flanging (vanstoning), and similar forming operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high-temperature characteristics.
ASTM A335 P11 Seamless Ferritic Alloy-Steel Pipe Quick Details
Manufacture:Seamless process ,Hot-finished or Cold-finished
Wall thickness(WT): 2.1mm--20 mm.
Outer diameter (OD): 21 mm--509mm
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded
Additional Info
Port of Shipment: Tianjin, China
Payment Terms:T / T, LC
Delivery: 7-15 days after payment
Surface: Tubes will be varnished (Outside only) to prevent rust.
Marking: Standard + Steel Grade + Size + Heat No + Lot No
Package: Bundles (hexagonal),Wooden Boxes,Crates (steel/wooden) or as required
Materials and Manufucture
Grade P11 Pipe may be either hot finished or cold drawn with the finishing treatment.
Heat Treatment:
P11 Seamless Ferritic Alloy-Steel Pipe are reheated and furnished in the full-annealed, isothermal annealed, or normal-ized and tempered condition. If furnished in the normalized and tempered condition,the minimum tempering temperature for Grades P11are 1200°F [650°C].
Chemical Composition of ASTM A335 P11
| Grade |
Chemical Composition(%) |
| C |
Mn |
P |
S |
Si |
Cr |
Mo |
| P11 |
0.05-0.015 |
0.30-0.60 |
≤0.025 |
≤0.025 |
0.50-1.00 |
1.00-1.50 |
0.44-0.65 |
Mechanical Properties of ASTM A335 P11
| Grade |
Mechanical property |
| Tensile Strength(MPa) |
Yield Strength(MPa) |
Elongation(%) |
| P11 |
≥415 |
≥205 |
≥30 |
Outside diameter tolerances of ASTM A335 Seamless Ferritic Alloy-Steel Pipe
| NPS Designator |
Over |
Under |
| in. |
mm |
in. |
mm |
| 1⁄8 to 1 1⁄2 , incl. |
1 ⁄ 64 (0.015) |
0.40 |
1 ⁄ 64 (0.015) |
0.40 |
| Over 1 1⁄2 to 4, incl. |
1 ⁄ 32 (0.031) |
0.79 |
1 ⁄ 32 (0.031) |
0.79 |
| Over 4 to 8, incl. |
1 ⁄ 16 (0.062) |
1.59 |
1 ⁄ 32 (0.031) |
0.79 |
| Over 8 to 12, incl. |
3 ⁄ 32 (0.093) |
2.38 |
1 ⁄ 32 (0.031) |
0.79 |
| Over 12 |
± 1 % |
Hydrostatic Test
Each length of pipe shall be subjected to the hydrostatic test or nondestructive examination.
Mechanical Tests Required
Transverse or Longitudinal Tension Test and Flattening Test, Hardness Test, or Bend Test-For material heat treated in a batch-type furnace, tests shall be made on 5 % of the pipe from each treated lot.
For small lots, at least 1 pipe shall be tested. For material heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5 % of the lot, but in no case less than 2 pipe.
Marking
In addition to the marking prescribed in Specification A 999/A 999M, the marking shall include the length, the ANSI schedule number and the heat number or manufacturer's number by which the heat can be identified.
Ordering Information
Orders for material includes the following, as required, to describe the desired material adequately:
(1) Quantity (feet, centimetres, or number of lengths),
(2) Name of material (seamless alloy steel pipe),
(3) Grade (P11),
(4) Manufacture (hot-finished or cold-drawn),
(5) Size (NPS or outside diameter and schedule number or average wall thickness),
(6) Length (specific or random),
(7) End finish (Ends Section of Specification A 999/A 999M),
(8) Test report required (Certification Section of Specification AA 999/A 999M)
Product Image
FAQ:
1. Q: I haven't done business with you guys before,how can I trust your company?
A: Our company has been in production of steel pipes for 16, almost 17 years, which is longer than most of our fellow suppliers, we've been golden suppliers for years. What's more, we've got quite a lot authority certificates, for example, CE, ISO9001, made in china onsite check certificate. I hope those above will be persuasive enough.
2. Q: What is the minimum order?
A: Yes, our company mainly deals with wholesale deals, but if you insist buying one piece, or you just need one piece, we would be very likely to make the MOQ as 1 piece for you though.
3. Q: How can I get a sample to check your quality? How long can I get the sample?
A: After price confirmed, FREE SAMPLE could be provided for your evaluation.
After you confirm the sample details, the samples will be ready for delivery in 3-7days,and will be sent to you via express and arrive in 3-5days.
4. Q: What payment methods your company accept?
A: We accept T/T, L/C, Western Union, Paypal.
5. Q: What's the shipment terms and delivery time of your company?
A: FOB,CFR,CIF,15-60days
6. Q: Do you give any discount ?
A: We'll surely try our best to help you get those by the best price and good service at the same time.
Contact: Vicky Wu
Audited Supplier 
){kind=link}